What should be paid attention to when starting and stopping the mineral water bottling machine?

What should be paid attention to when starting and stopping the mineral water bottling machine?

The mineral water bottling machine is composed of several parts such as pretreatment system, reverse osmosis system and filling system, and adopts a unit combination structure. The purpose is to reduce the equipment footprint and facilitate transportation and on-site installation and commissioning. It has the advantages of small footprint, stable system operation, convenient operation and maintenance. The main components of the equipment (membrane, pump, instrument, etc.) are provided by famous foreign professional manufacturers. The equipment adopts advanced pretreatment device, which can choose fully automatic or manual, and the effect is remarkable, which can effectively protect the RO membrane and prolong its service life. The water purification effect is good, the water quality is clear and sweet, and the produced water can be used for raw or hot drinks. With the function of ozone disinfection and sterilization, the storage period of the purified water is prolonged, and it is rich in a large amount of deeply decomposed oxygen.

Let me introduce the start-up procedure of the mineral water bottling machine:

1. Open the water inlet ball valve, observe whether the water pressure of each pressure gauge is normal, and observe whether there is leakage in the pipeline.

2. Turn on the raw water booster pump and observe whether the booster pump works normally. The working pressure of the raw water booster pump (1.5-3.0kgf/cm2 when leaving the factory).

3. Turn on the reverse osmosis power switch, observe whether the water inlet of the reverse osmosis equipment is normal, turn down the waste water regulating valve, and increase the circulation valve, so that the mineral water filling production line can avoid low pressure protection when the water inlet pressure is low. , When the equipment is in normal operation, adjust the waste water regulating valve and circulation valve to the normal position.

4. Observe that the reverse osmosis inlet water pressure gauge (the pressure gauge on the left side of the reverse osmosis equipment) is ≥0.5kgf/cm2, and the pressure gauge of the high-pressure pump is within the range of 10-20kgf/cm2.

5. By adjusting the wastewater regulating valve and wastewater circulation valve, the wastewater flow rate, pure water flow rate, inlet water pressure, and high-pressure pump working pressure are within the normal working range.

6. When the water level of the water storage tank reaches the upper level, the reverse osmosis equipment will automatically shut down, and when the water level of the water storage tank drops to the lower level, the reverse osmosis equipment will automatically turn on.

7. When the water production work is over, the entire reverse osmosis system should be shut down. The shutdown sequence is as follows: first turn off the reverse osmosis power switch, turn off the booster pump power switch, and close the tap water inlet ball valve.

Let me introduce to you what to do when the mineral water bottling machine shuts down:

After the equipment is out of use, it needs to be flushed. The flushing time can be set according to the outage time, and certain protective measures should be taken for the shutdown. If protective measures are implemented for the equipment, the protective agent inside must be discharged before use, and it must be rinsed before it can be restarted. If there is water in the front of the shutdown, the water needs to be drained, because the water has deteriorated, and the mineral water filling production line must be flushed without pressure. If there is not a lot of water and there is air, the air and water must be discharged together, and the air will damage the membrane elements.

8、Partner With Us For mineral water bottling machine

Every beverage factory needs a mineral water bottling machine. It not only aids in boosting output but also assists in ensuring that your consumables are of good quality

Contact us right away if you wish to purchase mineral water bottling machine. We can provide you with a quotation and address any inquiries you have regarding this equipment.